Posted by Advantage Rigging on 28th Oct 2026
Blog
Same chain. Same load. Different angle.
So why does your lifting capacity change?
You can have a chain sling that's properly rated for a lift at 60°, but spread those legs out to 30°, and that
…
Posted by Advantage Rigging on 13th Mar 2026
Sling Inspection and Maintenance: How to Prevent Sling Failure on the Jobsite
Picture a crew lining up a routine lift during a shutdown. The load is ready, the crane is positioned, and someone grabs a sling from the gang box. It looks fine at a glance. No obvious cuts, no broke
…
Posted by Advantage Rigging on 23rd Feb 2026
Understanding Sling Inspection and Replacement Criteria
On many job sites, slings don’t get much attention until something looks obviously wrong.
A frayed edge. A little rust. A tag that’s hard to read.
Someone says, “It’s still go
…
Posted by Advantage Rigging on 16th Feb 2026
Inspecting Slings: Avoiding Common Mistakes for Safe Lifting
Slings do heavy work every day. A fast, real inspection helps prevent bad lifts, damaged loads, and avoidable downtime.
Walk onto almost any jobsite and you’ll see slings in constant use.
Cha
…
Posted by Advantage Rigging on 11th Feb 2026
Sling Maintenance: What to Check Before Your Next Lift
It’s early. The crew is staging steel.
The lift plan is ready. The crane is set.
Someone grabs a sling from the rack and says, “This one should be fine.”
That moment right there is
…
Posted by Advantage Rigging on 26th Jan 2026
Understanding Sling Inspection: Key Considerations for Safety Managers
Practical, jobsite-focused guidance on sling inspection, failure risk, and safer lifting decisions.
On many jobsites, slings are treated like background equipment. They get hung up, grabbed when nee
…